The Ins and Outs of Installing Your New Faucet

The Ins and Outs of Installing Your New Faucet

May 24, 2019

If your kitchen or bathroom faucet is in need of an upgrade, you may be considering doing the job yourself. However, if you’re looking for a professional finish, you may prefer to find a plumber to handle your faucet installation in Vacaville, CA. If you decide to make a go of it yourself, here’s some tips to get you started on installing your new faucet.

Picking your new faucet

Picking out your new faucet is the fun part of the process. Think about what you did or didn’t like about the old one, and which new features and style you’d like on the new one. Now is your chance to upgrade! Many of today’s options for a new faucet installation in Vacaville, CA have built-in water conservation technology, which uses 30 percent less water than traditional or standard faucets. Consider also wand attachments and spray settings if you’re replacing your kitchen faucet. You’ll also need to know the configuration and holes beneath your current faucet to get a model that fits your sink.

Removing the old faucet

Removing the old faucet begins underneath the sink. Before you begin, you’ll want to shut off the water supply to the faucet. These are usually hand-crank valves at the base of the water supply lines. If you don’t have these, you’ll need to shut off the main water supply to your home. Then, turn on the faucet to run out any water that’s still in the lines. You’ll want to remove everything from beneath the cabinet so you have a good working area. You’ll also want to gather all your tools, including an adjustable wrench and a towel for leaking water, as well as a flashlight.

Next, disconnect the supply lines leading to the old faucet and remove the mounting hardware that attaches the faucet to the sink. The supply lines will be connected to the bottom of the faucet with nuts. The mounting hardware can be connected with screws, nuts or fasteners. Then you’ll be able to lift the old faucet off the sink.

Installing the new faucet

Many faucets will come with customized installation instructions, but you’ll generally do the reverse of what you just did. You’ll also need caulk or plumber’s putty to help seal the new faucet to the sink. If you need help with your faucet installation in Vacaville, CA, a professional plumber should be able to help you in no time. Once the hardware is installed, reconnect the supply lines. You might also want to wrap plumber’s tape around the threads of the supply lines before reconnecting them, which will guard against leaking. Turn on the supply line valves and you should be up and running! Remove the aerator from the spout and flush the faucet clean by running water at full pressure for a few minutes. Then reinstall the aerator.

If you need assistance with your faucet installation in Vacaville, CA, ABC Plumbing would love to be your full-service plumber. We pride ourselves on our extensive knowledge and experience and are on call for emergency plumbing service. Call us today to learn more or schedule service!

Categorised in: